416 Reference Set 05 Html5 Security 20eb74c5

<!-- Threat Modeling Skill | Version 3.0.2 (20260204a) | https://github.com/fr33d3m0n/threat-modeling | License: BSD-3-Clause -->

# HTML5 Security Cheat Sheet

## Introduction

The following cheat sheet serves as a guide for implementing HTML 5 in a secure fashion.

## Communication APIs

### Web Messaging

Web Messaging (also known as Cross Domain Messaging) provides a means of messaging between documents from different origins in a way that is generally safer than the multiple hacks used in the past to accomplish this task. However, there are still some recommendations to keep in mind:

- When posting a message, explicitly state the expected origin as the second argument to `postMessage` rather than `*` in order to prevent sending the message to an unknown origin after a redirect or some other means of the target window's origin changing.
- The receiving page should **always**:
    - Check the `origin` attribute of the sender to verify the data is originating from the expected location.
    - Perform input validation on the `data` attribute of the event to ensure that it's in the desired format.
- Don't assume you have control over the `data` attribute. A single [Cross Site Scripting](Cross_Site_Scripting_Prevention_Cheat_Sheet.md) flaw in the sending page allows an attacker to send messages of any given format.
- Both pages should only interpret the exchanged messages as **data**. Never evaluate passed messages as code (e.g. via `eval()`) or insert it to a page DOM (e.g. via `innerHTML`), as that would create a DOM-based XSS vulnerability. For more information see [DOM based XSS Prevention Cheat Sheet](DOM_based_XSS_Prevention_Cheat_Sheet.md).
- To assign the data value to an element, instead of using a insecure method like `element.innerHTML=data;`, use the safer option: `element.textContent=data;`
- Check the origin properly exactly to match the FQDN(s) you expect. Note that the following code: `if(message.origin.indexOf(".owasp.org")!=-1) { /* ... */ }` is very insecure and will not have the desired behavior as `owasp.org.attacker.com` will match.
- If you need to embed external content/untrusted gadgets and allow user-controlled scripts (which is highly discouraged), please check the information on [sandboxed frames](HTML5_Security_Cheat_Sheet.md#sandboxed-frames).

### Cross Origin Resource Sharing

- Validate URLs passed to `XMLHttpRequest.open`. Current browsers allow these URLs to be cross domain; this behavior can lead to code injection by a remote attacker. Pay extra attention to absolute URLs.
- Ensure that URLs responding with `Access-Control-Allow-Origin: *` do not include any sensitive content or information that might aid attacker in further attacks. Use the `Access-Control-Allow-Origin` header only on chosen URLs that need to be accessed cross-domain. Don't use the header for the whole domain.
- Allow only selected, trusted domains in the `Access-Control-Allow-Origin` header. Prefer allowing specific domains over blocking or allowing any domain (do not use `*` wildcard nor blindly return the `Origin` header content without any checks).
- Keep in mind that CORS does not prevent the requested data from going to an unauthorized location. It's still important for the server to perform usual [CSRF](Cross-Site_Request_Forgery_Prevention_Cheat_Sheet.md) prevention.
- While the [Fetch Standard](https://fetch.spec.whatwg.org/#http-cors-protocol) recommends a pre-flight request with the `OPTIONS` verb, current implementations might not perform this request, so it's important that "ordinary" (`GET` and `POST`) requests perform any access control necessary.
- Discard requests received over plain HTTP with HTTPS origins to prevent mixed content bugs.
- Don't rely only on the Origin header for Access Control checks. Browser always sends this header in CORS requests, but may be spoofed outside the browser. Application-level protocols should be used to protect sensitive data.

### WebSockets

- Check out [WebSocket Security Cheat Sheet](WebSocket_Security_Cheat_Sheet.md) to learn about WebSocket specific protections.

### Server-Sent Events

- Validate URLs passed to the `EventSource` constructor, even though only same-origin URLs are allowed.
- As mentioned before, process the messages (`event.data`) as data and never evaluate the content as HTML or script code.
- Always check the origin attribute of the message (`event.origin`) to ensure the message is coming from a trusted domain. Use an allow-list approach.

## Storage APIs

### Local Storage

- Also known as Offline Storage, Web Storage. Underlying storage mechanism may vary from one user agent to the next. In other words, any authentication your application requires can be bypassed by a user with local privileges to the machine on which the data is stored. Therefore, it's recommended to avoid storing any sensitive information in local storage where authentication would be assumed.
- Due to the browser's security guarantees it is appropriate to use local storage where access to the data is not assuming authentication or authorization.
- Use the object sessionStorage instead of localStorage if persistent storage is not needed. sessionStorage object is available only to that window/tab until the window is closed.
- A single [Cross Site Scripting](https://owasp.org/www-community/attacks/xss/) can be used to steal all the data in these objects, so again it's recommended not to store sensitive information in local storage.
- A single [Cross Site Scripting](https://owasp.org/www-community/attacks/xss/) can be used to load malicious data into these objects too, so don't consider objects in these to be trusted.
- Pay extra attention to "localStorage.getItem" and "setItem" calls implemented in HTML5 page. It helps in detecting when developers build solutions that put sensitive information in local storage, which can be a severe risk if authentication or authorization to that data is incorrectly assumed.
- Do not store session identifiers in local storage as the data is always accessible by JavaScript. Cookies can mitigate this risk using the `httpOnly` flag.
- There is no way to restrict the visibility of an object to a specific path like with the attribute path of HTTP Cookies, every object is shared within an origin and protected with the Same Origin Policy. Avoid hosting multiple applications on the same origin, all of them would share the same localStorage object, use different subdomains instead.

### Client-side databases

- On November 2010, the W3C announced Web SQL Database (relational SQL database) as a deprecated specification. A new standard Indexed Database API or IndexedDB (formerly WebSimpleDB) is actively developed, which provides key-value database storage and methods for performing advanced queries.
- Underlying storage mechanisms may vary from one user agent to the next. In other words, any authentication your application requires can be bypassed by a user with local privileges to the machine on which the data is stored. Therefore, it's recommended not to store any sensitive information in local storage.
- If utilized, WebDatabase content on the client side can be vulnerable to SQL injection and needs to have proper validation and parameterization.
- Like Local Storage, a single [Cross Site Scripting](https://owasp.org/www-community/attacks/xss/) can be used to load malicious data into a web database as well. Don't consider data in these to be trusted.

## Geolocation

- The [Geolocation API](https://www.w3.org/TR/2021/WD-geolocation-20211124/#security) requires that user agents ask for the user's permission before calculating location. Whether or how this decision is remembered varies from browser to browser. Some user agents require the user to visit the page again in order to turn off the ability to get the user's location without asking, so for privacy reasons, it's recommended to require user input before calling `getCurrentPosition` or `watchPosition`.

## Web Workers

- Web Workers are allowed to use `XMLHttpRequest` object to perform in-domain and Cross Origin Resource Sharing requests. See relevant section of this Cheat Sheet to ensure CORS security.
- While Web Workers don't have access to DOM of the calling page, malicious Web Workers can use excessive CPU for computation, leading to Denial of Service condition or abuse Cross Origin Resource Sharing for further exploitation. Ensure code in all Web Workers scripts is not malevolent. Don't allow creating Web Worker scripts from user supplied input.
- Validate messages exchanged with a Web Worker. Do not try to exchange snippets of JavaScript for evaluation e.g. via `eval()` as that could introduce a [DOM Based XSS](DOM_based_XSS_Prevention_Cheat_Sheet.md) vulnerability.

## Tabnabbing

Attack is described in detail in this [article](https://owasp.org/www-community/attacks/Reverse_Tabnabbing).

To summarize, it's the capacity to act on parent page's content or location from a newly opened page via the back link exposed by the **opener** JavaScript object instance.

It applies to an HTML link or a JavaScript `window.open` function using the attribute/instruction `target` to specify a [target loading location](https://www.w3schools.com/tags/att_a_target.asp) that does not replace the current location and then makes the current window/tab available.

To prevent this issue, the following actions are available:

Cut the back link between the parent and the child pages:

- For HTML links:
    - To cut this back link, add the attribute `rel="noopener"` on the tag used to create the link from the parent page to the child page. This attribute value cuts the link, but depending on the browser, lets referrer information be present in the request to the child page.
    - To also remove the referrer information use this attribute value: `rel="noopener noreferrer"`.
- For the JavaScript `window.open` function, add the values `noopener,noreferrer` in the [windowFeatures](https://developer.mozilla.org/en-US/docs/Web/API/Window/open) parameter of the `window.open` function.

As the behavior using the elements above is different between the browsers, either use an HTML link or JavaScript to open a window (or tab), then use this configuration to maximize the cross supports:

- For [HTML links](https://www.scaler.com/topics/html/html-links/), add the attribute `rel="noopener noreferrer"` to every link.
- For JavaScript, use this function to open a window (or tab):

``` javascript
function openPopup(url, name, windowFeatures){
  //Open the popup and set the opener and referrer policy instruction
  var newWindow = window.open(url, name, 'noopener,noreferrer,' + windowFeatures);
  //Reset the opener link
  newWindow.opener = null;
}
```

- Add the HTTP response header `Referrer-Policy: no-referrer` to every HTTP response sent by the application ([Header Referrer-Policy information](https://owasp.org/www-project-secure-headers/). This configuration will ensure that no referrer information is sent along with requests from the page.

Compatibility matrix:

- [noopener](https://caniuse.com/#search=noopener)
- [noreferrer](https://caniuse.com/#search=noreferrer)
- [referrer-policy](https://caniuse.com/#feat=referrer-policy)

## Sandboxed frames

- Use the `sandbox` attribute of an `iframe` for untrusted content.
- The `sandbox` attribute of an `iframe` enables restrictions on content within an `iframe`. The following restrictions are active when the `sandbox` attribute is set:
    1. All markup is treated as being from a unique origin.
    2. All forms and scripts are disabled.
    3. All links are prevented from targeting other browsing contexts.
    4. All features that trigger automatically are blocked.
    5. All plugins are disabled.

It is possible to have a [fine-grained control](https://html.spec.whatwg.org/multipage/iframe-embed-object.html#attr-iframe-sandbox) over `iframe` capabilities using the value of the `sandbox` attribute.

- In old versions of user agents where this feature is not supported, this attribute will be ignored. Use this feature as an additional layer of protection or check if the browser supports sandboxed frames and only show the untrusted content if supported.
- Apart from this attribute, to prevent Clickjacking attacks and unsolicited framing it is encouraged to use the header `X-Frame-Options` which supports the `deny` and `same-origin` values. Other solutions like framebusting `if(window!==window.top) { window.top.location=location;}` are not recommended.

## Credential and Personally Identifiable Information (PII) Input hints

- Protect the input values from being cached by the browser.

> Access a financial account from a public computer. Even though one is logged-off, the next person who uses the machine can log-in because the browser autocomplete functionality. To mitigate this, we tell the input fields not to assist in any way.

```html
<input type="text" spellcheck="false" autocomplete="off" autocorrect="off" autocapitalize="off"></input>
```

Text areas and input fields for PII (name, email, address, phone number) and login credentials (username, password) should be prevented from being stored in the browser. Use these HTML5 attributes to prevent the browser from storing PII from your form:

- `spellcheck="false"`
- `autocomplete="off"`
- `autocorrect="off"`
- `autocapitalize="off"`

## Offline Applications

- Whether the user agent requests permission from the user to store data for offline browsing and when this cache is deleted, varies from one browser to the next. Cache poisoning is an issue if a user connects through insecure networks, so for privacy reasons it is encouraged to require user input before sending any `manifest` file.
- Users should only cache trusted websites and clean the cache after browsing through open or insecure networks.

## Progressive Enhancements and Graceful Degradation Risks

- The best practice now is to determine the capabilities that a browser supports and augment with some type of substitute for capabilities that are not directly supported. This may mean an onion-like element, e.g. falling through to a Flash Player if the `<video>` tag is unsupported, or it may mean additional scripting code from various sources that should be code reviewed.

## HTTP Headers to enhance security

Consult the project [OWASP Secure Headers](https://owasp.org/www-project-secure-headers/) in order to obtains the list of HTTP security headers that an application should use to enable defenses at browser level.