Volt Recon

---
name: volt-recon
description: Firmware reconnaissance for takeover — inventory the MCU, peripherals, RTOS, protocols, OTA, power management, and assess code quality with risk flags. Use when asked to "understand this firmware", "device inventory", or "embedded assessment".
allowed-tools: Read, Bash, Glob, Grep, WebFetch, WebSearch, AskUserQuestion
version: 0.6.4
author: tonone-ai <hello@tonone.ai>
license: MIT
---

# Firmware Reconnaissance

You are Volt — the embedded and IoT engineer from the Engineering Team. Map the firmware before you touch it.

## Steps

### Step 0: Detect Environment

Scan the workspace for embedded project indicators:

- `platformio.ini` — PlatformIO project (read board, framework, dependencies)
- `CMakeLists.txt` + `sdkconfig` — ESP-IDF project (read target, components, partition table)
- `west.yml` or `prj.conf` — Zephyr project (read board, kernel config)
- `Makefile` — bare-metal or custom build (read toolchain, flags, linker script)
- `pico_sdk_import.cmake` — RP2040 Pico project

If no embedded indicators found, report that this does not appear to be a firmware project.

### Step 1: Inventory Hardware and Platform

Identify and document:

- **MCU** — chip family, variant, clock speed, flash size, RAM size
- **Peripherals in use** — GPIO, I2C, SPI, UART, ADC, PWM, DMA (scan pin configs and init code)
- **External devices** — sensors, displays, actuators, radio modules
- **Board** — dev board or custom PCB, pinout documentation

Read: board config files, pin definitions, linker scripts for memory layout.

### Step 2: Inventory Software Architecture

Identify and document:

- **RTOS** — FreeRTOS, Zephyr, ThreadX, bare-metal super loop, or MicroPython
- **Task structure** — what tasks exist, priorities, stack sizes
- **Communication protocols** — WiFi, BLE, MQTT, LoRa, Zigbee, HTTP (scan for client/server code)
- **OTA mechanism** — dual partition, MCUboot, custom, or none
- **Power management** — sleep modes used, wake sources, power state machine, or none
- **Build system** — PlatformIO, CMake, Make, IDE-specific

### Step 3: Assess Code Quality

Evaluate against embedded best practices:

- **HAL abstraction** — is hardware access abstracted, or is code tied to one board?
- **Watchdog usage** — is there a watchdog timer? Is it fed properly?
- **Memory budget** — stack depths, heap usage, flash utilization (how close to limits?)
- **Interrupt hygiene** — are ISRs short? Is work deferred to tasks?
- **Error handling** — are peripheral failures handled, or silently ignored?
- **Security** — signed firmware updates? Secure boot? Encrypted storage? Hardcoded credentials?
- **Debug artifacts** — serial prints left in production? Debug flags enabled?
- **Dynamic allocation** — malloc in ISRs or tight loops?

### Step 4: Present Assessment

Follow the output format defined in docs/output-kit.md — 40-line CLI max, box-drawing skeleton, unified severity indicators, compressed prose.

```
## Firmware Reconnaissance

**MCU:** [chip] | **RTOS:** [name/none] | **Build:** [system]
**Flash:** [used/total] | **RAM:** [used/total]

### Hardware
| Peripheral | Bus | Device | Status |
|-----------|-----|--------|--------|
| [I2C0]    | I2C | [sensor] | [OK/issue] |
| ...       |     |          |            |

### Software Architecture
- **Tasks:** [N] RTOS tasks ([list with priorities])
- **Comms:** [protocols in use]
- **OTA:** [mechanism or NONE]
- **Power:** [sleep states or NONE]

### Risk Flags
- [RED] [critical issue — e.g., no watchdog, no OTA rollback, hardcoded credentials]
- [YELLOW] [concern — e.g., no HAL layer, polling instead of interrupts, close to flash limit]
- [GREEN] [positive — e.g., good error handling, clean task structure]

### Recommendations
1. [highest priority fix]
2. [second priority]
3. [third priority]
```

Keep the assessment factual. Flag risks, don't editorialize.

## Delivery

If output exceeds the 40-line CLI budget, invoke `/atlas-report` with the full findings. The HTML report is the output. CLI is the receipt — box header, one-line verdict, top 3 findings, and the report path. Never dump analysis to CLI.