Ensure broadcast ICMP requests are ignored
Scanned 9/3/2026
Install to Claude Code
npx -y skills add CyberStrikeus/CyberStrike --skill cis-ubuntu1804-v220-3-3-4 --agent claude-codeInstalls into .claude/skills of the current project.
Are you the author of Cis Ubuntu1804 V220 3 3 4?
Add the live security badge to your README — it updates automatically with every re-scan.
[](https://www.skillsdirectory.com/skills/cyberstrikeus-cis-ubuntu1804-v220-3-3-4)More formats (shields.io, HTML) on the badges page.
---
name: cis-ubuntu1804-v220-3-3-4
description: "Ensure broadcast ICMP requests are ignored"
category: cis-networking
version: "2.2.0"
author: cyberstrike-official
tags: [cis, ubuntu, linux, ubuntu-18.04, networking, kernel-parameter]
cis_id: "3.3.4"
cis_benchmark: "CIS Ubuntu Linux 18.04 LTS Benchmark v2.2.0"
tech_stack: [ubuntu, linux]
cwe_ids: []
chains_with: []
prerequisites: []
severity_boost: {}
---
# CIS Ubuntu Linux 18.04 LTS Benchmark v2.2.0 - Control 3.3.4
## Description
Setting `net.ipv4.icmp_echo_ignore_broadcasts` to 1 will cause the system to ignore all ICMP echo and timestamp requests to broadcast and multicast addresses.
## Rationale
Accepting ICMP echo and timestamp requests with broadcast or multicast destinations for your network could be used to trick your host into starting (or participating) in a Smurf attack. A Smurf attack relies on an attacker sending large amounts of ICMP broadcast messages with a spoofed source address. All hosts receiving this message and responding would send echo-reply messages back to the spoofed address, which is probably not combatable. If many hosts respond to the packets, the amount of traffic on the network could be significantly multiplied.
## Impact
None.
## Audit Procedure
### Command Line
Run the following command to verify broadcast ICMP requests are ignored:
```bash
sysctl net.ipv4.icmp_echo_ignore_broadcasts
```
```bash
grep -E '^\s*net\.ipv4\.icmp_echo_ignore_broadcasts\s*=\s*1\b' /etc/sysctl.conf /etc/sysctl.d/*.conf
```
## Expected Result
```
net.ipv4.icmp_echo_ignore_broadcasts = 1
```
## Remediation
### Command Line
Set the following parameter in `/etc/sysctl.conf` or a `/etc/sysctl.d/*` file:
```
net.ipv4.icmp_echo_ignore_broadcasts = 1
```
Run the following commands to set the active kernel parameters:
```bash
sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
sysctl -w net.ipv4.route.flush=1
```
## Default Value
net.ipv4.icmp_echo_ignore_broadcasts = 1
## References
1. NIST SP 800-53 Rev. 5: CM-7, SC-5
2. CIS Ubuntu Linux 18.04 LTS Benchmark v2.2.0
## CIS Controls
Version 8
4.1 Establish and Maintain a Secure Configuration Process - Establish and maintain a secure configuration process for enterprise assets.
Version 7
5.1 Establish Secure Configurations - Maintain documented, standard security configuration standards for all authorized operating systems and software.
## Profile Applicability
- Level 1 - Server
- Level 1 - Workstation
## Assessment Status
Automated
Is this your skill, or is something wrong with this listing? Request removal or report an issue. Author removals are honored within 72 hours.
No comments yet. Be the first to comment!