Ensure secure ICMP redirects are not accepted
Scanned 9/3/2026
Install to Claude Code
npx -y skills add CyberStrikeus/CyberStrike --skill cis-ubuntu1604-v200-3-3-3 --agent claude-codeInstalls into .claude/skills of the current project.
Are you the author of Cis Ubuntu1604 V200 3 3 3?
Add the live security badge to your README — it updates automatically with every re-scan.
[](https://www.skillsdirectory.com/skills/cyberstrikeus-cis-ubuntu1604-v200-3-3-3)More formats (shields.io, HTML) on the badges page.
---
name: cis-ubuntu1604-v200-3-3-3
description: "Ensure secure ICMP redirects are not accepted"
category: cis-networking
version: "2.0.0"
author: cyberstrike-official
tags: [cis, ubuntu, linux, ubuntu-16.04, networking]
cis_id: "3.3.3"
cis_benchmark: "CIS Ubuntu Linux 16.04 LTS Benchmark v2.0.0"
tech_stack: [ubuntu, linux]
cwe_ids: []
chains_with: []
prerequisites: []
severity_boost: {}
---
# CIS Ubuntu Linux 16.04 LTS Benchmark v2.0.0 - Control 3.3.3
## Description
Secure ICMP redirects are the same as ICMP redirects, except they come from gateways listed on the default gateway list. It is assumed that these gateways are known to your system, and that they are likely to be secure.
## Rationale
It is still possible for even known gateways to be compromised. Setting `net.ipv4.conf.all.secure_redirects` to 0 protects the system from routing table updates by possibly compromised known gateways.
## Impact
None.
## Audit Procedure
### Command Line
Run the following commands and verify output matches:
```bash
sysctl net.ipv4.conf.all.secure_redirects
```
```bash
sysctl net.ipv4.conf.default.secure_redirects
```
```bash
grep "net\.ipv4\.conf\.all\.secure_redirects" /etc/sysctl.conf /etc/sysctl.d/*
```
```bash
grep "net\.ipv4\.conf\.default\.secure_redirects" /etc/sysctl.conf /etc/sysctl.d/*
```
## Expected Result
```
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
```
And the grep commands should return:
```
net.ipv4.conf.all.secure_redirects= 0
net.ipv4.conf.default.secure_redirects= 0
```
## Remediation
### Command Line
Set the following parameters in `/etc/sysctl.conf` or a `/etc/sysctl.d/*` file:
```
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
```
Run the following commands to set the active kernel parameters:
```bash
sysctl -w net.ipv4.conf.all.secure_redirects=0
sysctl -w net.ipv4.conf.default.secure_redirects=0
sysctl -w net.ipv4.route.flush=1
```
## Default Value
secure_redirects is enabled (set to 1) by default.
## References
1. CIS Ubuntu Linux 16.04 LTS Benchmark v2.0.0
## CIS Controls
Version 7
5.1 Establish Secure Configurations - Maintain documented, standard security configuration standards for all authorized operating systems and software.
## Profile Applicability
- Level 1 - Server
- Level 1 - Workstation
## Assessment Status
Automated
Is this your skill, or is something wrong with this listing? Request removal or report an issue. Author removals are honored within 72 hours.
No comments yet. Be the first to comment!