2077 Gotchas 320f6d38

# DDoS Gotchas

## Common Errors

### "False positives blocking legitimate traffic"

**Cause**: Sensitivity too high, wrong action, or missing exceptions  
**Solution**:
1. Lower sensitivity for specific rule/category
2. Use `log` action first to validate (Enterprise Advanced)
3. Add exception with custom expression (e.g., allowlist IPs)
4. Query flagged requests via GraphQL Analytics API to identify patterns

### "Attacks getting through"

**Cause**: Sensitivity too low or wrong action  
**Solution**: Increase to `default` sensitivity and use `block` action:
```typescript
const config = {
  rules: [{
    expression: "true",
    action: "execute",
    action_parameters: { id: managedRulesetId, overrides: { sensitivity_level: "default", action: "block" } },
  }],
};
```

### "Adaptive rules not working"

**Cause**: Insufficient traffic history (needs 7 days)  
**Solution**: Wait for baseline to establish, check dashboard for adaptive rule status

### "Zone override ignored"

**Cause**: Account overrides conflict with zone overrides  
**Solution**: Configure at zone level OR remove zone overrides to use account-level

### "Log action not available"

**Cause**: Not on Enterprise Advanced DDoS plan  
**Solution**: Use `managed_challenge` with low sensitivity for testing

### "Rule limit exceeded"

**Cause**: Too many override rules (Free/Pro/Business: 1, Enterprise Advanced: 10)  
**Solution**: Combine conditions in single expression using `and`/`or`

### "Cannot override rule"

**Cause**: Rule is read-only  
**Solution**: Check API response for read-only indicator, use different rule

### "Cannot disable DDoS protection"

**Cause**: DDoS managed rulesets cannot be fully disabled (always-on protection)  
**Solution**: Set `sensitivity_level: "eoff"` for minimal mitigation

### "Expression not allowed"

**Cause**: Custom expressions require Enterprise Advanced plan  
**Solution**: Use `expression: "true"` for all traffic, or upgrade plan

### "Managed ruleset not found"

**Cause**: Zone/account doesn't have DDoS managed ruleset, or incorrect phase  
**Solution**: Verify ruleset exists via `client.rulesets.list()`, check phase name (`ddos_l7` or `ddos_l4`)

## API Error Codes

| Error Code | Message | Cause | Solution |
|------------|---------|-------|----------|
| 10000 | Authentication error | Invalid/missing API token | Check token has DDoS permissions |
| 81000 | Ruleset validation failed | Invalid rule structure | Verify `action_parameters.id` is managed ruleset ID |
| 81020 | Expression not allowed | Custom expressions on wrong plan | Use `"true"` or upgrade to Enterprise Advanced |
| 81021 | Rule limit exceeded | Too many override rules | Reduce rules or upgrade (Enterprise Advanced: 10) |
| 81022 | Invalid sensitivity level | Wrong sensitivity value | Use: `default`, `medium`, `low`, `eoff` |
| 81023 | Invalid action | Wrong action for plan | Enterprise Advanced only: `log` action |

## Limits

| Resource/Limit | Free/Pro/Business | Enterprise | Enterprise Advanced |
|----------------|-------------------|------------|---------------------|
| Override rules per zone | 1 | 1 | 10 |
| Custom expressions | ✗ | ✗ | ✓ |
| Log action | ✗ | ✗ | ✓ |
| Adaptive DDoS | ✗ | ✓ | ✓ |
| Traffic history required | - | 7 days | 7 days |

## Tuning Strategy

1. Start with `log` action + `medium` sensitivity
2. Monitor for 24-48 hours
3. Identify false positives, add exceptions
4. Gradually increase to `default` sensitivity
5. Change action from `log` → `managed_challenge` → `block`
6. Document all adjustments

## Best Practices

- Test during low-traffic periods
- Use zone-level for per-site tuning
- Reference IP lists for easier management
- Set appropriate alert thresholds (avoid noise)
- Combine with WAF for layered defense
- Avoid over-tuning (keep config simple)

See [patterns.md](./patterns.md) for progressive rollout examples.