Managing Range Of Motion Assessments

---
name: managing-range-of-motion-assessments
language: en
description: Documents goniometric measurements with active/passive ROM and comparison to normative values. Use when measuring joint ROM, documenting mobility assessments, or tracking ROM progress.
tags:
  - management
  - rehabilitation-medicine
metadata:
  author: casemark
  practice_areas:
    - Physical Therapy
    - Occupational Therapy
    - Rehabilitation Medicine
  document_types:
    - Management Report
  skill_modes:
    - Management
    - Coordination
---

# Managing Range of Motion Assessments

Documents goniometric and inclinometric measurements including active ROM, passive ROM, and end-feel classification with comparison to established normative values per the American Academy of Orthopaedic Surgeons (AAOS) and AMA Guides.

## Why This Skill Exists

Range of motion measurement is the most frequently performed objective assessment in rehabilitation and is a required element for documenting impairment, tracking progress, and establishing disability ratings. Goniometric data drives surgical decisions, therapy progression, impairment ratings (AMA Guides to the Evaluation of Permanent Impairment), and workers compensation determinations. Inconsistent measurement technique, failure to document active vs. passive distinction, or omission of normative comparisons undermines clinical utility and legal defensibility. This skill standardizes ROM documentation to meet clinical, medicolegal, and payer requirements.

---

## Checkpoint A — Intake Verification

Before beginning ROM assessment, confirm:

**Required clinical questions:**
- Which joints require measurement and what is the clinical indication?
- Are there surgical precautions, weight-bearing restrictions, or motion limits ordered by the physician?
- Is this an initial evaluation, progress reassessment, discharge measurement, or impairment rating?
- Is the patient taking analgesics or muscle relaxants that may affect measurements?
- Has the patient completed a warm-up or is this a cold measurement (document which)?
- Are there hardware, contractures, heterotopic ossification, or joint replacements affecting expected ROM?

**Required documents:**
- Physician order or referral specifying joints to assess
- Prior ROM measurements if reassessment (with dates and examiner)
- Surgical reports if post-operative (specify any ROM restrictions)
- Imaging reports relevant to joint pathology
- AMA Guides edition specified if impairment rating purpose

---

## Step 1 — Prepare Measurement Environment and Equipment

- Use a calibrated universal goniometer or digital inclinometer appropriate to the joint
- Ensure patient is positioned per standardized protocol for each joint (supine, seated, prone as specified by Norkin & White or Reese & Bandy)
- Expose the joint fully; clothing must not impede landmark identification
- Allow the patient 5 minutes of rest in the testing position before measurement if cold measurement is intended
- Verify goniometer arms are aligned to bony landmarks before reading

**Equipment options by joint:**
- Universal goniometer: most upper and lower extremity joints
- Bubble inclinometer: spine (per AMA Guides methodology)
- Digital inclinometer: spine, shoulder, when higher precision needed
- Finger goniometer: MCP, PIP, DIP joints
- Cervical ROM device (CROM): cervical spine multi-planar measurement

## Step 2 — Measure Active ROM First, Then Passive ROM

**Measurement protocol:**
1. Demonstrate the motion to the patient
2. Measure active ROM (AROM) first: patient moves through available range independently
3. Record AROM end-range in degrees
4. Measure passive ROM (PROM): examiner moves the joint to end-range
5. Record PROM end-range and classify end-feel
6. Take three measurements per motion; record the average or best of three (document which convention used)
7. Measure the uninvolved contralateral side for comparison

**End-feel classification (Cyriax):**
- Soft: soft tissue approximation (e.g., knee flexion — calf contacts thigh)
- Firm: muscular stretch (e.g., hip flexion with knee extended — hamstring stretch)
- Hard: bone-on-bone contact (e.g., elbow extension — olecranon in fossa)
- Empty: patient stops motion due to pain before mechanical limit is reached
- Springy block: rebound at end-range suggesting internal derangement

Document abnormal end-feels with [VERIFY] flag for physician review.

## Step 3 — Record Measurements Against Normative Values

Document using the standard format: Joint — Motion — AROM/PROM — Normal value — % of Normal

**Upper extremity norms (AAOS):**
| Joint | Motion | Normal |
|---|---|---|
| Shoulder | Flexion | 0-180 |
| Shoulder | Abduction | 0-180 |
| Shoulder | External rotation | 0-90 |
| Shoulder | Internal rotation | 0-70 |
| Elbow | Flexion | 0-150 |
| Elbow | Extension | 0 (full) |
| Wrist | Flexion | 0-80 |
| Wrist | Extension | 0-70 |

**Lower extremity norms (AAOS):**
| Joint | Motion | Normal |
|---|---|---|
| Hip | Flexion | 0-120 |
| Hip | Extension | 0-30 |
| Hip | Abduction | 0-45 |
| Hip | Internal rotation | 0-45 |
| Hip | External rotation | 0-45 |
| Knee | Flexion | 0-135 |
| Knee | Extension | 0 (full) |
| Ankle | Dorsiflexion | 0-20 |
| Ankle | Plantarflexion | 0-50 |

Flag any measurement >10 degrees below normative as a deficit requiring intervention plan.

## Step 4 — Calculate Deficits and Track Progress

- Compute deficit: Normal ROM minus measured AROM = deficit in degrees
- Compute percent of normal: (Measured AROM ÷ Normal ROM) x 100
- Compare to contralateral side when bilateral measurements available
- For reassessments, compute change from prior measurement with dates
- Minimal detectable change (MDC) for goniometry is typically 5-10 degrees depending on joint and examiner experience
- Only report "improvement" or "decline" when change exceeds MDC

**For AMA Guides impairment rating (6th edition):**
- Use inclinometer method for spinal ROM
- Three valid trials within 10% of each other or 5 degrees
- Measured values converted to impairment class per Diagnosis-Based Impairment (DBI) tables
- ROM used as a grade modifier, not standalone impairment basis in 6th edition

## Step 5 — Correlate ROM Deficits to Functional Limitations

Do not report ROM in isolation. Link each significant deficit to a functional impact:

- "Knee flexion limited to 95 degrees AROM, preventing full squat for floor-to-stand transfers and stair negotiation with normal step-over-step pattern (requires 110 degrees minimum)"
- "Shoulder flexion limited to 120 degrees AROM, preventing overhead reaching required for independent upper body dressing and shelf access above shoulder height"
- "Ankle dorsiflexion limited to 5 degrees, contributing to compensatory gait deviation (early heel-off, shortened stride length) and increased fall risk"

---

## Checkpoint B — Pre-Finalization Review

Before finalizing ROM assessment documentation:

- [ ] All measured joints include both AROM and PROM values
- [ ] End-feel documented for each PROM measurement
- [ ] Contralateral measurements recorded when applicable
- [ ] Normative values cited with source (AAOS, AMA Guides edition)
- [ ] Deficits calculated and expressed in degrees and percent of normal
- [ ] Functional correlation stated for each significant ROM deficit
- [ ] Measurement technique and equipment documented
- [ ] Patient positioning specified for each measurement
- [ ] Precautions affecting measurement noted (e.g., "PROM hip flexion not assessed due to posterior hip precautions post-THA")
- [ ] Prior measurements referenced for reassessments with change analysis

---

## Quality Audit

- [ ] AROM recorded before PROM for each joint motion
- [ ] Three-trial measurement protocol documented
- [ ] End-feel matches expected pattern for the joint or flagged as abnormal
- [ ] Normative source and edition specified
- [ ] Changes from prior assessment exceed MDC before being labeled as improvement
- [ ] Functional impact linked to each deficit >10 degrees from normal
- [ ] AMA Guides methodology followed if impairment rating purpose
- [ ] All [VERIFY] flags resolved or escalated
- [ ] Examiner credentials and date included
- [ ] Documentation distinguishes measurement limitations (pain-limited, guarding, hardware restriction)

---

## Guidelines

- Standardize goniometer placement per published protocols (Norkin & White, Clarkson)
- Always document whether AROM or PROM — never record "ROM" without specification
- Use degrees as the unit of measurement; never use descriptive terms alone ("limited," "within functional limits") without numeric values
- For spinal ROM, dual inclinometer technique is the standard per AMA Guides
- Intra-rater reliability is higher than inter-rater; use the same examiner for serial measurements when possible
- Do not force PROM through guarding or pain — document empty end-feel and defer
- Post-surgical ROM must be interpreted against surgeon-specified protocols and timelines
- ROM measurements are required elements for CPT evaluation codes (97161-97163 complexity determination)
- When ROM data will be used in legal proceedings, follow AMA Guides methodology precisely and document validity indicators
- Report ROM limitations within the context of the complete examination — ROM alone does not determine functional capacity