All authors
Claude Skills by KI3P
github.com/KI3P7 skills0 installs6 views
- Filter Hil TestVerify on real hardware that the receive DSP filters hold their frequencies when the sample rate changes. Drives the radio's I/Q receive inputs with an Analog Discovery 2's W1/W2 in quadrature, reads the demodulated audio on scope Ch1, and sweeps the CW audio filters, the 14 equaliser cells and the SSB filter at both 192 and 176.4 ksps. Use when the user asks to test the filters on hardware, verify sample-rate independence, or check that a filter change works on the real radio.Votes: 0GitHub stars: 14
- Flash RadioCompile the PhoenixSketch production firmware and flash it to the Teensy 4.1 radio over USB. Use when the user asks to build, compile, upload, flash, deploy, or program the radio / Teensy / Phoenix firmware.Votes: 0GitHub stars: 14
- Receive TestRun the receive-chain integrity test on the SDR. Samples the SDR's demodulated audio output on an Analog Discovery 2 and verifies it is a clean 1 kHz tone at ~234 mV RMS with no interruptions or discontinuities. An external signal generator must already be driving the SDR's RF input. Use when the user asks to test the receiver, verify the receive chain, check audio output, or run a receive-chain test.Votes: 0GitHub stars: 14
- Run TestsCompile and run the PhoenixSketch unit tests under code/test using CMake + Google Test. Use when the user asks to run, build, or check the unit tests / ctest / Google Test suite for the radio firmware.Votes: 0GitHub stars: 14
- Timing MeasurementMeasure execution time of functions or code regions in the PhoenixSketch firmware by instrumenting the source with Flag() calls and capturing the resulting pin transitions on an Analog Discovery 2. Use when the user wants to profile, time, benchmark, or characterize how long a piece of radio code takes to run.Votes: 0GitHub stars: 14
- Transmit Filter TestVerify on real hardware that the transmit DSP filters hold their frequencies when the sample rate changes. Drives the radio's microphone input with an Analog Discovery 2's W1, captures the exciter I/Q outputs together on Ch1/Ch2, and measures the transmit audio passband corners, opposite-sideband suppression, out-of-band rejection and fold-back at both 192 and 176.4 ksps. Use when the user asks to test the transmit filters on hardware, check the transmit audio bandwidth, verify transmit sampl...Votes: 0GitHub stars: 14
- Transmit TestRun the PTT signal integrity test on the radio transmitter hardware. Use when the user asks to test the transmitter, run a PTT test, check I/Q outputs, or verify transmit signal quality. Requires an Analog Discovery 2 connected to the radio.Votes: 0GitHub stars: 14