Skills Sh Mblode Agent Skills Agents Md

---
name: agents-md
description: Audits and writes AGENTS.md files using execution-first standards. Checks commands, gotchas, and signal-to-noise ratio. Use when asked to audit, review, score, refactor, or improve agent instruction files, fix stale commands, reduce bloat, or asking "my AGENTS.md is bad", "help me write a CLAUDE.md", or "improve my agent instructions".
---

# AGENTS.md Audit

AGENTS.md is the source of truth for agent instructions. Claude Code loads both `AGENTS.md` and `CLAUDE.md` natively — no symlink required. If a project already has a `CLAUDE.md`, rename it to `AGENTS.md` (the tool-agnostic name).

AGENTS.md files are execution contracts, not knowledge bases.

**Litmus test for every line:** "Would removing this cause the agent to make a mistake?" If no, cut it. Bloated instruction files cause agents to ignore actual rules. KISS applies to instruction files too — the simplest set of rules that prevents mistakes is the best set.

## Reference Files

| File | Read When |
|------|-----------|
| `references/quick-checklist.md` | Default: fast triage (10 checks, target >= 8/10) |
| `references/quality-criteria.md` | Full audit mode or when quick audit fails |
| `references/refactor-workflow.md` | File is bloated (>150 lines) or low-signal |
| `references/root-content-guidance.md` | Deciding what stays in root vs separate files |
| `references/templates.md` | Drafting new file or rebuilding from scratch |

## Quick Example

**Input:** AGENTS.md with stale commands and generic advice
**Quick audit result:** 5/10 (Fail)
**Key issues:** Missing test command, generic "follow best practices" advice, dead link to deleted folder
**Fix:** Add `npm test`, replace generic advice with specific gotcha, remove dead link
**After:** 9/10 (Pass)

## How to Use

Default path:
- Start with quick audit using `references/quick-checklist.md` (10 checks)
- Escalate to full audit (`references/quality-criteria.md`) only when quick audit fails, file is high-risk, or user requests it
- Apply edits only after reporting findings and getting confirmation

Progressive loading:
- Always load the checklist for the selected audit mode
- Load `references/refactor-workflow.md` only for low-signal files (below target score, stale commands, or root file over ~150 lines)
- Load `references/templates.md` only when drafting a new file or rebuilding from scratch
- Load `references/root-content-guidance.md` only when deciding what stays in root vs moved out

## Audit Workflow

Copy this checklist to track progress:

```
Audit Progress:
- [ ] Step 1: Discover files
- [ ] Step 2: Select audit mode (quick or full)
- [ ] Step 3: Run audit against checklist
- [ ] Step 4: Report findings with score table
- [ ] Step 5: Propose minimal diffs
- [ ] Step 6: Validate changes
- [ ] Step 7: Apply and verify
```

### Step 1: Discover files

Run:

```bash
find . \( -name "AGENTS.md" -o -name "CLAUDE.md" -o -name "CLAUDE.local.md" \) 2>/dev/null | sort
```

Also check for a home-level file: `~/.claude/CLAUDE.md` (applies to all sessions).

AGENTS.md is the source of truth. If a project has a CLAUDE.md without an AGENTS.md, recommend renaming it:

```bash
mv CLAUDE.md AGENTS.md
```

Claude Code loads `AGENTS.md`, `CLAUDE.md`, and `CLAUDE.local.md` natively from any level. No symlinks needed. Instruction files at multiple levels (project root, parent directories, child directories) are all loaded automatically. `CLAUDE.local.md` is the gitignored personal variant. Audit each level independently.

For monorepos, include workspace-level AGENTS.md files.

### Step 2: Select audit mode

- **Quick audit:** Default for most files (10 checks, target >= 8/10)
- **Full audit:** When quick audit fails, file is high-risk, or user requests full scoring

### Step 3: Run audit

- Quick audit target: **>= 8/10** checks from `references/quick-checklist.md`
- Full audit file-quality target: **>= 91% of applicable points** from `references/quality-criteria.md`
- Full audit execution target: **2/2** when producing an edit proposal
- Score each root file independently

### Step 4: Report findings

Output a concise report before edits:

```markdown
## AGENTS.md Audit Report

| File | Mode | Score | Grade | Key Issues |
|------|------|-------|-------|------------|
| ./AGENTS.md | Quick | 6/10 | Fail | Missing test command, stale path, doc-heavy section |
```

### Step 5: Propose minimal diffs

- Fix broken/stale commands first
- Remove generic, duplicate, or obsolete guidance
- Move deep detail into linked files using `@path/to/file.md` import syntax
- Use emphasis ("IMPORTANT:", "YOU MUST") on critical rules that agents tend to skip
- Keep rewrites incremental and preserve useful wording when possible

Show each proposed change with rationale and a diff snippet.

### Step 6: Validate changes

Validation loop:
1. Run smoke checks for core commands (`dev`, `test`, `build`, `lint/typecheck`) when applicable
2. If commands cannot be run, verify script existence and note the limitation
3. Check that linked paths resolve
4. Confirm no contradictory rules remain
5. If issues found → revise → validate again
6. Only proceed when validation passes

### Step 7: Apply and verify

- Apply approved edits
- After each PR, add at most one new gotcha only if it prevented or fixed a real mistake
- Verify changes by re-running relevant commands

## Gotchas

- Don't rewrite the entire file when targeted edits would pass audit — incremental fixes preserve useful wording and reduce review burden.
- Don't add gotchas that aren't grounded in a real failure — hypothetical warnings become noise the agent learns to ignore.
- Don't audit CLAUDE.local.md the same way as AGENTS.md — local files are personal and not committed, so enforce less strictly.
- Don't remove emphasis markers (IMPORTANT, YOU MUST) from rules agents consistently skip — these exist because the default phrasing was not enough.
- Don't treat a high quick-audit score as permission to skip validation — stale commands can hide behind passing checklists.